b'DAILY PROCEDURE CERTIFIED FIRMNAME AND WORK PRACTICES ADDRESSPHONELOGOwww.certifiedrenovator.comOwner-Occupant:Jobsite Address: Day and Date:JOBSITE DAILY SETUPYES NO N/ASigns posted, clearly defining the work area before commencing, and remaining during renovation.Work area isolated to prevent dust and debris leaving, including plastic sheeting to confine area, tack mats topreventing tracking, dual entry sheeting for vertical entry way.Work area on exterior protected with sheeting 20 feet from edges, floors below, and all at risk foliage covered.All objects removed, and/or covered with plastic sheeting with edges and seams taped.All ducts and openings in work area covered.Windows and Doors covered in work area (interior), or within 20 feet (exterior) with plastic sheeting withedges and seams sealed, and applied dual sheeting for entry into work area or into house.Interior Floor space covered up to 6 feet beyond perimeter or sufficient to contain any debris (interior) orground covered to 10 feet (exterior). Precautions used to ensure all personnel, tools and other items, and containers of waste are free of dust anddebris hen leaving jobsite.WORKER PROTECTIONYES NO N/AWorkers instructed on proper use and application of all safety and protection equipment and clothing such as foot, hand, head and body protective garments, breathing masks, and proper cleaning of hands, face etc.during and after entering and exiting the work area, and hygiene practices for food and beverage.DAILY WASTE HANDLING AND CLEANINGYES NO N/AWaste contained to prevent releases of dust/debris before waste is removed from work area.Waste removed from work area was stored under containment in enclosure, or behind barrier, at conclusionof each workday to prevent releases of dust and debris.All waste transported was contained to prevent releases of dust and debris.Work area cleaned until no dust and debris and residue remains at end of each day.All paint chips, debris and components collected without allowing dust dispersal in heavy-duty bags (6mil)and properly sealed.All protective sheeting misted, folded dirty-side inward, properly taped shut or sealed in heavy duty bag (6mil) when removed from work area.All sheeting used to isolate work areas from non-contaminated rooms, remains in place until final cleaning.'