b"OSHA Rules for Respirators - 3DOSHA regulations require employers to train and fit test workers who use respiratory protection dur-ing the course of their workday. OSHA recommendsthat each worker be medically evaluated before theworker is fit tested. In summary employers must:1. Maintain a written respiratory protection program with worksite specific procedures for fittesting and training.2. Provide instruction on the respiratory hazardsto which the workers are potentially exposed duringroutine and emergency situations.3. Provide instruction on the uses and limita-tions of all respirators worn in the work area.4. Instruct and demonstrate to workers how to properly don and adjust any respirators wornaccording to the manufacturers' instructions.5. Allow the workers an opportunity to practice these procedures.6. Provide user seal check instructions.7. Fit test each worker to be assigned a respirator.8. Instruct the workers in the procedures for the maintenance and storage of the respiratorsbeing used.9. Inform the workers how to recognize medical signs and symptoms that may limit or Reusable Respirator from 3Mprevent the effective use of the respirators. Replace the Filters after each use10. Document the successful completion of training and fit testing for all workersRESPIRATOR FIT TEST RECORD Company:wearing respirators. Address:City:State:_____Zip:_________Tel:Most, if not all of the workers onDate:________________Name of Fit Tester:Fit testing conducted in compliance with OSHA Standard 1910.134(F).an RRP job will wear disposable If other local, state or federal regulations apply (such as MSHA), you may list them here: Signature:______________________________________________________________________mask-type respirators P100 orones with replaceable cartridges. Type of OSHA accepted fit test protocol used:(Qualitative): ___Saccharin___BitrexTM ___Isoamyl Acetate ___Irritant Smoke (Quantitative): Portacount Model #______________Occupational Health Dynamic Model #:____________The chart included shows Name Signature Respirator Fit TestedFit Test Could not be how to demonstrate the proper(please print) (Make, Model, Style, Size) PassFail fit tested due to:donning of the mask and how to test for its proper effective-ness. Each worker on the jobshould be shown this chart whendonning a disposable respirator.Once the cartridge type is fitaccording to its instructions, itwill not need to be fit again.Then, using the includedRespirator Fit Test Record, document each worker forComments:each job to confirm their training and demonstration."