b'Replacing Old PVC Pocket WindowStep 5: Step 6:Remove any Clean anyscrews insealant andthe jambsdebris from theanchoring the jambs, headerold window. and sill of theOnce cut old, left-in-placethrough,window frame.collapse the Using liquidjambs in on and/or each side to adhesive-backedfree the old flashing, flashwindow frame. the header andjambs and sill tocreate properflashing and silldrainage withthe make-shiftsill pan usingthe interior faceof the stool asthe back dam.Step 7: WaterTake the new Damage:window and Old Pocket Vinylinstall it over the Replacementstool and down Windows mightinto the pocket have allowed waterusing the same into the cavity orbedding sealant behind the trim.sealant and This water maymountinghave caused techniques for damage, or it inside-out pocket may have left thewindow install. wood damp.Impel Rods, which are harmless boron rods the diameterof a pencil. Inserted in the old wood frame at strategicplaces will protect the wood from rot, mold, mildew andinsects. When they come in contect with water or moisture theyrelease the boron which is a natural wood preservative.Boron rods are widely used in log homes and are veryeffective for wood window frames that come in contactwith moisture.Just drill a hole, insert the rod, and install the window.Window Fitters Guide to Window Installation522020 AWDI, LLC Do not reproduce without permission'