b"Step 9: Step 10:Set 2 shimsRe-apply interior(minimum 1/16; trim and seal for maximum 1/8) finish as necessary.about 2 inches infrom eachside on the sill.Place the new window into theopening, on thetwo shims andagainstthe exterior trim,pressing againstthe sealant. Shim the new win-dow as necessaryto insure it isplumb and square.Using the suppliedmounting screws,anchor the newwindow to theopening framing.Step 11: FinishCaulk seal theDetails:perimeter taking carenot to seal the sill inany way that would Shims to establishblock weep drainage. drainage path to frontFlashing over sill with up-turnedSealant edge at back to create Sill PanCap NailFastener tocreate drain path outNew Exterior Trim 3/8wider toform BlindstopThe Contractor's Guide to installing Vinyl Windows472020 AWDI, LLC Do not reproduce without permission"