b'Tilt and Sliding and Folding DoorsExterior DoorsAs with the Tilt n Turn window, a Fold n Slide or Tilt n Slide Door needs to beinstalled into a wood rough opening or an opening lined with a wood buck.A full sill pan is required for the door as shown. Capture Blocks need to be placed under the door for support, and behind the any side that has a hinge, for support.It is equally important to make the opening Plumb, Level, Square and check Planarcondition. Because they are large doors, it becomes more important to check forCrown, Bow or uneven sill. Slow expansion foam sealing tape works well with Door units because it offersinsulation and blocks water intrusion while allowing drainage.If expansion foam sealing tape is not used, then conventional flashing with a func-tioning sill pan will work. The bottom line is to prevent water from getting in, allowthe water that condenses to drain out,and any remaining moisture to dry.Treated Wood BuckFlashing Caulk/SealantDrip CapShimsTilt and Slide DoorSill PanSill FlashingOptionalAluminumPatio DoorFolding Door Cap StockWindow Fitters Guide to Window Installation 122Contents 2020-Do not reproduce without permission'