b'Mount the Window (Method B)Step 5: Step 7:Anchor windowthrough mounting If the house wrap hasflange slots on all been moved aside, itsides. Use Simplexcan now be un-tapedCap Nails on Header. and placed over theLightly nail through second layer of self-slots in fin. Do not adhesive flashing tonail tightly. complete the installa-tion.Again, take careto leave the bottom freefor drainage into thedrainage plane.Simplex CapNails OVER finallows frame tomove better than nails throughmounting slotsStep 6: Step 8:A drip cap should be Once the drip cap isused across the header installed and the windowof the of the installed is seated in the opening,window/door.Often, J- plumb and square, theChannel, when used top layer of the adhesive-with siding is thought to backed flashing can bebe a drip cap.applied.Do not rely on the work The surface flashing isof others . Bend a cap or applied to the jamb sidesused the supplied cap first, overlapping the silland install on top of the pan, weep screen and sillwindow/door using flashing assembly.sealant. The header flashing isapplied over the topfin/flange of the windowand overlaps the jambflashing.The bottom is kept freeto allow drainage of anywater penetration intothe drainage plane.Drip cap WindowNailiframeng fin Window Fitters Guide to Window Installation99 2020 AWDI, LLC Do not reproduce without permission'